Carbon Based Pipes Al Material Low Finned Tube for Condenser Heat Exchanger

Material:carbon steel, stainless steel, copper, copper-zinc, copper-nickel, aluminium
 
Base Tube Diameter 12.7-25.4mm
Base Tube Wall Thiness 1.65-3.0mm
Fin Thickness is 0.3-0.5mm
Fin pitch 0.9-1.5mm
Fin high 0.9-1.3mm
 
Low finned tubes Low-finned tube/threaded tube/internally threaded tube Low-finned threaded copper tube heat exchanger air conditioner copper tube red copper finned tube internal and external thread high-efficiency evaporator tube/Efficient tube /Corrugated Tubes/LHT Low Fin Tubes
 
Feature:
The Maximum heat transfer ratio of low finned tubes will be up 2.5 to 3 times to compare with plain bare tubes and also it can be not only reduced the cost for new equipment or retrofitting of old equipments but also save the size or weight of new equipment from the beginning stage of basic design.
 
Torich advantage:
1. Selection of superior materials
2. Support of non-standard customized
3. Scientific and reasonable design
4. The service life is long
 
Application:
Heat exchangers of applications for cooling and heating of liquid and gas,including water,oil,steam and air as well as for condensation,evaporation.Double-pipe heat exchanger condensers,Absorption refrigerator chiller absorbers,Absorption refrigerator chiller evaporators, Falling film evaporators,Absorption refrigerator chiller condensers
Material:carbon steel, stainless steel, copper, copper-zinc, copper-nickel, aluminium
 
Base Tube Diameter 12.7-25.4mm
Base Tube Wall Thiness 1.65-3.0mm
Fin Thickness is 0.3-0.5mm
Fin pitch 0.9-1.5mm
Fin high 0.9-1.3mm
 
Low finned tubes Low-finned tube/threaded tube/internally threaded tubeLow-finned threaded copper tube heat exchanger air conditioner copper tube red copper finned tube internal and external thread high-efficiency evaporator tube/Efficient tube /Corrugated Tubes/LHT Low Fin Tubes
 
Feature:
The Maximum heat transfer ratio of low finned tubes will be up 2.5 to 3 times to compare with plain bare tubes and also it can be not only reduced the cost for new equipment or retrofitting of old equipments but also save the size or weight of new equipment from the beginning stage of basic design.
 
Torich advantage:
1. Selection of superior materials
2. Support of non-standard customized
3. Scientific and reasonable design
4. The service life is long
 
Application:
Heat exchangers of applications for cooling and heating of liquid and gas,including water,oil,steam and air as well as for condensation,evaporation.Double-pipe heat exchanger condensers,Absorption refrigerator chiller absorbers,Absorption refrigerator chiller evaporators,  Falling film evaporators,Absorption refrigerator chiller condensers

 

QUALITY CONTROL:

1. Incoming Raw Material Inspection

2. Raw Material Segregation to avoid steel grade mix-up

3. Heating and Hammering End for Cold Drawing

4. Cold Drawing and Cold Rolling, on line inspection

5. Heat Treatment, +A, +SRA, +LC, +N, Q+T

6. Straightening-Cutting to specified length-Finished Measuring Inspection

7. Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc

8. Packing and Stocking.