Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: A 556 / 556M
Brand: Torich
Type: Seamless
Application: Boiler Pipe
Section Shape: Special
Surface Treatment: Black
Usage: Machinery Industry
Technique: Cold Drawn
Material: Carbon Steel
Packaging: In wooden
Productivity: 3000ton per month
Transportation: Ocean
Place of Origin: china
Supply Ability: 10000ton per year
Certificate: ISO9001
Port: Shanghai,Ningbo
Payment Type: L/C,T/T
A 556/A 556M Cold-Drawn Carbon Feedwater Heater Seamless Steel Tubes
China leading manufacturers and suppliers of Special Pipes, and we are specialize in Engineering Special Steel,Elliptical Steel Tube,Triangle Steel Tube, Profile Steel Tube,Profile Steel Pipe,etc.
1. Referenced Documents
1.1 ASTM Standards:
A 450/A 450M Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes E 30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron
2. Manufacture
2.1 Manufacture-Tubes shall be made by the seamless process and shall be cold drawn.
2.2 Heat Treatment:
2.2.1 Cold-drawn tubes shall be heat treated after the final cold-draw pass at a temperature of 1200°[640°C] or higher to ensure ductility satisfactory for rolling into tube sheets and to meet mechanical properties as specified.
2.2.2 If stress-relief anneal of the U-bends is specified, the anneal shall consist of heating the bent portion within a range of 1100 to 1200°F [585 to 640°C].
3. Chemical Composition
3.1 The steel shall conform to one of the requirements as to chemical composition as prescribed in Table 1. 3.2 When a grade is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade in
Element | Composition, % | ||
---|---|---|---|
| Grade A2 | Grade B2 | Grade c2 |
Carbon, max | 0.18 | 0.27 | 0.3 |
Manganese | 0.27-0.63 | 0.29-0.93 | 0.29-1.06 |
Phosphorus | 0.035 | 0.035 | 0.035 |
Sulfur, max | 0.035 | 0.035 | 0.035 |
Silicon, min | ... | 0.10 | 0.10 |
4. Permissible Variations in Dimensions (Fig. 1)
4.1 Permissible variations from the specified outside diametershall not exceed 0.004 in. [0.10 mm] for tubing under1.0-in. [25.4-mm] outside diameter nor 0.006 in. [0.15 mm]for tubing 1.0 in. [25.4 mm] to 1.25 in. [31.7 mm] inclusive.These tolerances do not apply to the bent portion of theU-tubes. At the bent portion of a U-tube for R = 2 D orgreater neither the major nor minor diameter of tube shalldeviate from nominal by more than 10 %. If 1 ⁄ D is specified,tolerances could be greater.
4.2 Permissible variations from the specified minimum wallthickness shall not exceed +20 % or −0. The wall thickness of
| Grade A2 | Grade B2 | Grade C2 |
---|---|---|---|
Tensile strength, min, ksi [MPa] | 47[320] | 60[410] | 70[480] |
Yield strength, min, ksi [MPa] | 26[180] | 37[260] | 40[280] |
Elongation in 2 in. or 50 mm, min, % (longitudinal) | 35 | 30 | 30 |
Grade A2 | HR B 72 |
---|---|
Grade B2 | HR B 79 |
Grade C2 | HR B 89 |
the tube in U-bent section shall be not less than valuedetermined by:
tf T 2R / 2R D (1)
where:
t = wall thickness after bending, in. [mm],
T = specified minimum tube wall thickness, in. [mm],
R = centerline bend radius, in. [mm], and
D = nominal outside tube diameter, in. [mm].
Product Categories : Profile Steel Tubes
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.