ASTM A240 UNS S32760 Steel Pipe

ASTM A240 UNS S32760 Plate is a super duplex grade stainless steel alloy made for specific applications. Super duplex is a grading of duplex steel which is a combination of ferrite and austenitic steel types. By combining the structures of ferrite and austenite steels, a remarkable corrosion resistance along with high tensile strength is achieved. SA 240 UNS S32760 Sheet is used in ships, tanks and containers to deploy in most of the surfaces around the metal lattice. UNS S32760 F55 Coil not only holds the high pressure in such systems but also remains the same for longer periods of time. Marine environment poses a high corrosion threat to metal due to the high chloride ion concentration and the salty solution. But since the Super Duplex UNS S32760 Strips is equipped with necessary composition to withstand such conditions, it is preferred in marine environments.

ASTM A240 UNS S32760 Plate Specification	ASTM A240 / ASME SA240 / NACE MR-0175
Tolerances of width and thickness of ASTM A240 UNS S32760 Plate	EN 10258 (formerly DIN 59381) EN 10151 ASTM A240 UNS S32760 strips for springs EN 10088 Super Duplex S32760 strip (general)
Standard ASTM A240 UNS S32760 Plate sizes in stock	1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm Cold rolled ASTM A240 UNS S32760 Plate 0.5-6.4 mm Hot rolled ASTM A240 UNS S32760 Plate 3.0–10.0 mm
UNS S32760 Zeron 100 Plate & Sheet Thickness	0.1 to 100 mm Thk
Width	10-2500mm
Super Duplex 2507 UNS S32760 Plate & Sheet Length	2m, 2.44m, 3m, or as required
ASTM A240 UNS S32760 Plate Finish	2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM A240 UNS S32760 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Duplex Stainless Steel UNS S32760 Plate & Sheet Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard

 ASTM A240 UNS S32760 Sheet Chemical Composition

C	Mn	P	S	Si	Cr	Ni	Mo	N
0.03	1.00	0.03	0.01	1.00	24.0-26.0	6.0-8.0	3.0-4.0	0.20-0.30

 SA 240 UNS S32760 Plate Mechanical Properties

Grades	Density (g/cm 3)	Density (lb/in 3)	Melting Point (°C)	Melting Point (°F)
Super Duplex S32760	7.8	0.281	1350	2460

 ASME SA 240 UNS S32760 Plate Tensile & Yield Strength

Tensile	Yield	Elongation	Hardness
MPa min	MPa min	% min	Brinell max
750	550	25	270

ASTM A240 UNS S32760 Plate Equivalent

Grade	UNS	EN	W-Nr	AFNOR
2507 Plate	S32760	Super Duplex DIN 1.4501	1.4501	-

Product Pictures

FAQ:

Q: Are you trading company or manufacturer ?