High Pressure Seamless Stainless Steel Tube For Boiler / Heat Exchangers

Seamless Stainless Steel Tubes for boiler and heat exchanger

Seamless Stainless Steel tubes For Boiler and Heat Exchanger, made according to the Chinese National Standard GB13296-91.

China Precision Steel Tube leading supplier, choose the high quality Hydraulic Precision Steel Tube, Precision Carbon Steel Tube, Precision Seamless Steel Tube, CDS Steel Tube, CDW Steel Tube

GB13296-91 is a standard applicable for Seamless Stainless Steel pipes which is used for boiler and heat exchanger.

 GB13296-1991 Seamless Stainless Steel Tubes for Boiler, Heat Exchangers

0Cr18Ni9 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

Standard: GB13296-91

Tolerance for seamless stainless boiler tube:

Length:

The length or general steel tube:

Hot Rolling(Extrusion) tube: 3~12 m

Cold Drawn(Cold Rolled) tube: 3~8 m

The length for water pipe & boiler steel pipe:

Hot Rolling(Extrusion) tube: 4~12 m

Cold Drawn(Cold Rolled) tube: 4~8 m

     Bending tolerance:

     WT≤15mm, Bending≤1.5mm/m

     WT＞15mm, Bending≤2.0mm/m

     End shape:

     Both ends of the pipe should be cut at right angles, and remove burrs

     mechanical property

     Heat treatment of longitudinal mechanical properties of steel pipe shall according to the standard.

     Hardness:

     For the tubes which W.T. ≥2 mm, Rockwell hardness tests should be taken.

    Tests of the seamless boiler tubes:

    1.Bending Test:

    The tubes should take the bending test when OD ≤22mm. The bending angle is 90 degrees, and the bending radius is 6 times the outer diameter of the steel tube.

    2. Hydraulic test;

    Eddy current testing, ultrasonic testing can be used instead of hydraulic tests. When eddy current testing, GB/T 7735-1995 Gr. A should be followed; when ultrasonic testing, GB/T 5777-1996 Gr. C8 should be followed.